Mwr222 Access And Login - ZyXEL Communications MWR222 - V1.0 Manual

Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any
3
damaged cables.
Disconnect and re-connect the power adaptor to the MWR222.
4
If the problem continues, contact the vendor.
5
31.2

MWR222 Access and Login

I don't know the IP address of my MWR222.
The default IP address is 192.168.10.1.
1
If you changed the IP address and have forgotten it, you might get the
2
IP address of the MWR222 by looking up the IP address of the default
gateway for your computer. To do this in most Windows computers,
click Start > Run, enter cmd, and then enter ipconfig. The IP
address of the Default Gateway might be the IP address of the
MWR222 (it depends on the network), so enter this IP address in your
Internet browser. Set your device to Router Mode, login (see the
Quick Start Guide for instructions) and go to the Device Information
table in the Status screen. Your MWR222's IP address is available in
the Device Information table.
• If the DHCP setting under LAN information is None, your device has a
fixed IP address.
• If the DHCP setting under LAN information is Client, then your device
receives an IP address from a DHCP server on the network.
If your MWR222 is a DHCP client, you can find your IP address from
3
the DHCP server. This information is only available from the DHCP
server which allocates IP addresses on your network. Find this
information directly from the DHCP server or contact your system
administrator for more information.
Reset your MWR222 to change all settings back to their default. This
4
means your current settings are lost. See Resetting MWR222 in the
Troubleshooting for information on resetting your MWR222.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory
2
defaults. See Resetting MWR222.
MWR222 User's Guide
206