Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 45 Network > WAN > Wired WAN: L2TP Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
To configure a L2TP client, you must configure the User Name
Connection Type
and Password fields for a layer-2 connection and the L2TP
parameters for an L2TP connection.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is
Retype to Confirm
correctly.
L2TP Configuration
Server IP Address
Type the IP address of the L2TP server.
Get automatically
Select this option If your ISP did not assign you a fixed IP address.
from ISP
This is the default selection.
Use Fixed IP
Select this option If the ISP assigned a fixed IP address.
Address
Enter your WAN IP address in this field if you selected Use Fixed
IP Address
IP Address.
Your MWR222 will automatically calculate the subnet mask based
IP Subnet Mask
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the MWR222.
Gateway IP
Enter a Gateway IP Address (if your ISP gave you one) in this
Address
field.
WAN IP Address Assignment
Get automatically
Select this to get your WAN IP address from your ISP.
from ISP
MWR222 User's Guide
116
Advertisement
Table of Contents
Troubleshooting
