ZyXEL Communications MWR222 - V1.0 Manual page 29

The following table describes the labels in this screen.
Table 8 Summary: Packet Statistics
LABEL DESCRIPTION
Port This is the MWR222's port type.
Status For the LAN ports, this displays the port speed and duplex setting or
Down when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if
you're using Ethernet encapsulation and Idle (line (ppp) idle), Dial
(starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE or PPTP encapsulation. This field displays Down when the line
is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total time the MWR222 has been for each session.
System Up Time This is the total time the MWR222 has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this
field.
Set Interval Click this button to apply the new poll interval you entered in the
Poll Interval(s) field.
Stop Click Stop to stop refreshing statistics.
MWR222 User's Guide
29