ZyXEL Communications MWR222 - V1.0 Manual page 136

Figure 86 Network > NAT > Application
The following table describes the labels in this screen.
Table 54 Network > NAT > Application
LABEL DESCRIPTION
Add Application Rule
Select the check box to enable this rule and the requested service can
be forwarded to the host with a specified internal IP address.
Active
Clear the checkbox to disallow forwarding of these ports to an inside
server without having to delete the entry.
Type a name (of up to 31 printable characters) to identify this rule in
the first field next to Service Name. Otherwise, select a predefined
Service Name service in the second field next to Service Name. The predefined
service name and port number(s) will display in the Service Name
and Port fields.
Type a port number(s) to define the service to be forwarded to the
specified server.
To specify a range of ports, enter a hyphen (-) between the first port
Port
and the last port, such as 10-20.
To specify two or more non-consecutive port numbers, separate them
MWR222 User's Guide
136