Chapter 21 Remote Management; Overview; What You Can Do; What You Need To Know - ZyXEL Communications MWR222 - V1.0 Manual

21. Remote Management

21.1 Overview

This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your MWR222 from a remote location
through the following interfaces:
• LAN and WAN
• LAN only
• WAN only
• SNMP v1
Note: The MWR222 is managed using the Web Configurator.

21.2 What You Can Do

Use the WWW screen ( WWW) to define the interface/s from which the MWR222 can
be managed remotely and specify a secure client that can manage the MWR222.
Use the SNMP (Simple Network Management Protocol) screen
enable SNMP v1 management for the MWR222.

21.3 What You Need to Know

Remote management over LAN or WAN will not work when:
1. The IP address in the Secured Client IP Address field ( WWW) does not
match the client IP address. If it does not match, the MWR222 will disconnect
the session immediately.
2. There is already another remote management session. You may only have
one remote management session running at one time.
3. There is a firewall rule that blocks it.
4. Some mobile WAN ISP blocks remote management. (for example, Verizon
allows it but AT&T and Sprint does not.)
MWR222 User's Guide
(Section
172
22.5) to