ZyXEL Communications MAX-200M1 Specifications

IEEE802.16e Simple Indoor CPE
max-200m1
max-210m1
max-230m1
Zero-Install, Indoor, Single Unit
IEEE 802.16e-2005 WiMAX Air Interface (TDD SOFDMA)
2.5GHz (MAX-200M1), 3.5GHz (MAX-210M1) and 2.3GHz
(MAX-230M1)
High Transmit Power (27dBm), 6dBi Built in Antenna,
and External Antenna Option
AAS Beamforming Smart Antenna
802.16e Security for Authentication and Ciphering
QoS Management
Local and Remote Control and SW Upgrade Capabilities
One Analog Phone Connection for SIP (RFC3261) VoIP
One Ethernet Plug with Advanced Embedded IP
Networking Features
Benefits
The Ultimate Broadband Wireless Technology
The MAX-200 series supports the IEEE 802.16e-2005, state of the art
SOFDMA based, radio interface, also known as WiMAX.
SIP Based VoIP Communication
VoIP signaling supports standard SIP (RFC3261), suitable for IP telephony
service deployment. Sophisticated voice compression and QoS mechanisms
provides toll quality voice communication.
Advanced IP Networking Features
MAX-200 series supports advanced IP networking features including all the
security needed for the user to safely access to internet.
Built-In Internal Antenna & Flexible External Antenna
MAX-200 series not only provides 6dBi antenna internally, but also provide
flexible external antenna system which let users could be easy to change
higher gain antenna themselves according to their specific needs.
Easy to Deploy
MAX-200 series is a single simple box designed to be self-installable by end
user without operator's truck roll-out. Rich LED bars show the WiMAX radio
signal strength can be used to adjust the direction and position.
Software Upgrade Over the Air
MAX-200 Series is fully configurable and software upgradeable over the
WiMAX radio interface and can be triggered by operator.
wireless