ZyXEL Communications MWR222 - V1.0 Manual page 213

Table 79 Firmware Features
FEATURE
Default IP Address
Default Subnet Mask
Default Password
DHCP Pool
Wireless Interface
Default Wireless SSID
Default Wireless DHCP
Pool Size
Device Management
Wireless Functionality
Firmware Upgrade
Configuration Backup &
Restoration
MWR222 User's Guide
DESCRIPTION
192.168.10.1 (router)
192.168.10.2. (AP)
255.255.255.0 (24 bits)
1234
192.168.10.33 to 192.168.10.64
Wireless LAN
ZyXEL
Wireless LAN: Same as LAN (32 from 192.168.10.33 to
192.168.10.64)
Use the Web Configurator to easily configure the rich range of
features on the MWR222.
Allows IEEE 802.11b and/or IEEE 802.11g wireless clients to
connect to the MWR222 wirelessly. Enable wireless security (
WPA(2)-PSK) and/or MAC filtering to protect your wireless
network.
Note: The MWR222 may be prone to RF (Radio
Frequency) interference from other 2.4 GHz devices
such as microwave ovens, wireless phones,
Bluetooth enabled devices, and other wireless LANs.
Download new firmware (when available) from the ZyXEL web
site and use the Web Configurator to put it on the MWR222.
Note: Only upload firmware for your specific model!
Make a copy of the MWR222's configuration and put it back on
the MWR222 later if you decide you want to revert back to an
earlier configuration.
213