ZyXEL Communications MWR222 - V1.0 Manual page 89

Select 64-bit WEP or 128-bit WEP.
WEP
This dictates the length of the security key that the network is going to
Encryption
use.
Select Auto or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP
key to login to the wireless client. Keep this setting at Auto unless you
Authenticatio
want to force a key verification before communication between the
n Method
wireless client and the ZyXEL Device occurs.
Select Shared Key to force the clients to provide the WEP key prior to
communication.
ASCII Select this option in order to enter ASCII characters as WEP key.
Select this option in order to enter hexadecimal characters as a WEP key.
Hex
The preceding "0x", that identifies a hexadecimal key, is entered
automatically.
The WEP keys are used to encrypt data. Both the MWR222 and the
wireless stations must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10
hexadecimal characters ("0-9", "A-F").
Key 1 to Key
4
If you chose 128-bit WEP, then enter 13 ASCII characters or 26
hexadecimal characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at any
one time. The default key is key 1.
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to reload the previous configuration for this screen.
Refer to Table 31 Network > Wireless LAN >
other labels in this screen.
9.5.3 WPA-Personal/Enterprise/WPA2-
Personal/Enterprise
Click Network > Wireless LAN to display the General screen. Select WPA-
Persoanl/Enterprise or WPA2-Personal/Enterprise from the Security Mode
list.
MWR222 User's Guide
General for descriptions of the
89