No Security - ZyXEL Communications MWR222 - V1.0 Manual

Table 24 WISP Mode: LAN > General Screen
LABEL DESCRIPTION
Wireless Setup
Network Enter the name of the access point to which you are connecting.
Name
(SSID)
Security
Security Select the security mode of the access point to which you want to
Mode connect.
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to reload the previous configuration for this screen.

7.5.1 No Security

Use this screen if the access point to which you want to connect does not use
encryption.
Figure 41 No Security (WISP)
The following table describes the labels in this screen.
MWR222 User's Guide
62