Table of Contents
Advertisement
Table 44 Network > WAN > Wired WAN: PPTP Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
To configure a PPTP client, you must configure the User Name
Connection Type
and Password fields for a PPP connection and the PPTP
parameters for a PPTP connection.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is
Retype to Confirm
correctly.
Nailed-up
Select Nailed-Up Connection if you do not want the connection
Connection
to time out.
This value specifies the time in minutes that elapses before the
Idle Timeout
MWR222 automatically disconnects from the PPTP server.
PPTP Configuration
Server IP Address
Type the IP address of the PPTP server.
Get automatically
Select this option If your ISP did not assign you a fixed IP address.
from ISP
This is the default selection.
Use Fixed IP
Select this option If the ISP assigned a fixed IP address.
Address
Enter your WAN IP address in this field if you selected Use Fixed
IP Address
IP Address.
Your MWR222 will automatically calculate the subnet mask based
IP Subnet Mask
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the MWR222.
Gateway IP
Enter a Gateway IP Address (if your ISP gave you one) in this
Address
field.
MWR222 User's Guide
112
Advertisement
Table of Contents
Troubleshooting
