ZyXEL Communications MWR222 - V1.0 Manual page 166

Use this table to allocate specific amounts of bandwidth based on a
Application List
pre-defined service.
# This is the number of an individual bandwidth management rule.
Select a priority from the drop down list box. Choose High, Mid or
Low.
• High - Select this for voice traffic or video that is especially
sensitive to jitter (jitter is the variations in delay).
Priority
• Mid - Select this for "excellent effort" or better than best effort and
would include important business traffic that can tolerate some
delay.
• Low - Select this for non-critical "background" traffic such as bulk
transfers that are allowed but that should not affect other
applications and users.
Category This is the category where a service belongs.
This is the name of the service.
Service
Select the check box to have the MWR222 apply this bandwidth
management rule.
Advanced Click the Edit icon to open the Rule Configuration screen where you
Setting can modify the rule.
User-defined Use this table to allocate specific amounts of bandwidth to specific
Service applications or services you specify.
# This is the number of an individual bandwidth management rule.
Select this check box to have the MWR222 apply this bandwidth
Enable
management rule.
Select LAN to apply bandwidth management to traffic from WAN to
LAN.
Select WAN to apply bandwidth management to traffic from
Direction
LAN/WLAN to WAN.
Select WLAN to apply bandwidth management to traffic from WAN to
WLAN.
Service Name Enter a descriptive name for the bandwidth management rule.
Category This is the category where a service belongs.
MWR222 User's Guide
166