Mac Filter - ZyXEL Communications MWR222 - V1.0 Manual

Reset Click Reset to reload the previous configuration for this screen.
Refer to Table 31 Network > Wireless LAN > Gener for descriptions of the other
labels in this screen.

9.6 MAC Filter

The MAC filter screen allows you to configure the MWR222 to give exclusive
access to devices (Allow) or exclude devices from accessing the MWR222 (Deny).
Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address
of the devices to configure this screen.
To change your MWR222's MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
Figure 60 Network > Wireless LAN > MAC
Filter
The following table describes the labels in this menu.
MWR222 User's Guide
91