Pin Configuration - ZyXEL Communications MWR222 - V1.0 Manual

The following figure shows you an example to set up wireless network and
security by pressing a button on both MWR222 and wireless client (the NWD210N
in this example).
Figure 47 Example WPS Process: PBC Method
(Figure 47 is using MWR222 instead of MWR222)

8.4.2 PIN Configuration

When you use the PIN configuration method, you need to use both MWR222's
configuration interface and the client's utilities.
Launch your wireless client's configuration utility. Go to the WPS settings
1
and select the PIN method to get a PIN number.
Enter the PIN number to the PIN field in the Network > Wireless LAN >
2
WPS Station screen on the MWR222.
Click Start buttons (or button next to the PIN field) on both the wireless
3
client utility screen and the MWR222's WPS Station screen within two
minutes.
The MWR222 authenticates the wireless client and sends the proper configuration
settings to the wireless client. This may take up to two minutes. Then the
wireless client is able to communicate with the MWR222 securely.
The following figure shows you how to set up wireless network and security on
MWR222 and wireless client (ex. NWD210N in this example) by using PIN
method.
MWR222 User's Guide
74