Ip Pool Setup; Lan Tcp/Ip; Ip Alias - ZyXEL Communications MWR222 - V1.0 Manual

Figure 79 LAN and WAN IP Addresses (implies wired WAN connection)
The LAN parameters of the MWR222 are preset in the factory with the following
values:
• IP address of 192.168.10.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.10.33.
These parameters should work for the majority of installations. If your ISP gives
you explicit DNS server address(es), read the embedded Web Configurator help
regarding what fields need to be configured.
11.3.1

IP Pool Setup

The MWR222 is pre-configured with a pool of 32 IP addresses starting from
192.168.10.33 to 192.168.10.64. This configuration leaves 31 IP addresses
(excluding the MWR222 itself) in the lower range (192.168.10.2 to
192.168.10.32) for other server computers, for instance, servers for mail, FTP,
TFTP, web, etc., that you may have.
11.3.2

LAN TCP/IP

The MWR222 has built-in DHCP server capability that assigns IP addresses and
DNS servers to systems that support DHCP client capability.
11.3.3

IP Alias

IP alias allows you to partition a physical network into different logical networks
over the same Ethernet interface. The MWR222 supports three logical LAN
interfaces via its single physical Ethernet interface with the MWR222 itself as the
gateway for each LAN network.
MWR222 User's Guide
126