Advance Screen - ZyXEL Communications MWR222 - V1.0 Manual

Network Name Enter the name of the access point to which you are connecting.
(SSID)
Security
Encryption Select the type of wireless encryption employed by the access point to
Type which you want to connect.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type the pre-shared key employed by the access point to which you
want to connect.
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to reload the previous configuration for this screen.

7.5.4 Advance Screen

Use this screen to enable the power saving mode of your MWR222. Go to
Configuration > Wireless LAN to open the following screen.
Figure 44 Configuration > Wireless LAN > Advance Screen (WISP)
The following table describes the labels in this screen.
MWR222 User's Guide
66