In the Network > LAN > Advanced screen, make sure Allow between LAN and
WAN is checked. This is not checked by default to keep the LAN secure.
If you still cannot access a network folder, make sure your account has access
rights to the folder you are trying to open.
I can access the Web Configurator after I switched to AP mode.
When you change from router mode to AP mode, your computer must have an IP
address in the range between "192.168.10.3" and "192.168.10.254".
Refer to
Appendix C
for instructions on how to change your computer's IP
address.
The following tables summarize the MWR222's hardware and firmware features.
MWR222 User's Guide
211