Security Mode: Static Wep - ZyXEL Communications NBG4604 User Manual

Chapter 7 Wireless LAN

7.11.1 Security Mode: Static WEP

Use this screen to configure the Static WEP security for your NBG4604 when it is
in AP + Bridge or Bridge Only mode.
Figure 55 Network > Wireless LAN > WDS (Static WEP)
The following table describes the labels in this screen. Refer to
97 for descriptions of other fields in this screen.
Table 36 Network > Wireless LAN > WDS (Static WEP)
LABEL
WEP Encryption
98
DESCRIPTION
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Table 35 on page
NBG4604 User's Guide