ZyXEL Communications MWR222 - V1.0 Manual page 50

Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
Interface Status
Interface
Status
Rate
Summary
Packet Statistics
MWR222 User's Guide
This column shows the type of data the MWR222 is recording.
This column shows the actual data recorded by the MWR222.
This is the total time the MWR222 has been on.
This field displays your MWR222's present date and time.
This displays what percentage of the MWR222's processing ability is
currently used. When this percentage is close to 100%, the MWR222 is
running at full load, and the throughput is not going to improve
anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth
management.
This shows what percentage of the heap memory the MWR222 is using.
This displays the MWR222 port types. The port types are: LAN and
WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or
Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP
encapsulation. This field displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and N/A when the WLAN is disabled.
Click Details... to go to the Monitor >
Use this screen to view port status and packet specific statistics.
50
Packet Statistics screen.