Table of Contents
Advertisement
WLAN Station Status
6.4.1 Navigation Panel
Use the menu in the navigation panel to configure MWR222 features in Access
Point mode.
The following screen and table show the features you can configure in Access
Point mode.
Figure 34 Menu: Access Point Mode
Refer to Table 20 Navigation Panel: Router Mod for descriptions of the labels
shown in the Navigation panel.
6.5 LAN Screen
Use this section to configure your LAN settings while in Access Point mode.
Click Network > LAN to see the screen below.
Note: If you change the IP address of the MWR222 in the screen below, you will
need to log into the MWR222 again using the new IP address.
MWR222 User's Guide
Click Details... to go to the Monitor >
screen. Use this screen to view the wireless stations that are currently
associated to the MWR222.
51
WLAN Station Status
Advertisement
Table of Contents
Troubleshooting
