ZyXEL Communications MWR222 - V1.0 Manual page 100

The following table describes the labels in this screen.
Table 41 Network > Wireless LAN > WDS
LABEL DESCRIPTION
WDS Setup
Select the operating mode for your MWR222.
• AP + Bridge - The MWR222 functions as a bridge and access point
simultaneously.
Basic Settings
• Bridge - The MWR222 acts as a wireless network bridge. It
establishes wireless links with other APs. You need to know the MAC
address of the peer device, which also must be in bridge mode. The
MWR222 can establish up to five wireless links with other APs.
Local MAC This is the MAC address of your MWR222.
Address
Select the Phy mode you want the MWR222 to use. This dictates the
Phy Mode
maximum size of packets during data transmission.
This is the MAC address of the peer device that your MWR222 wants to
Remote MAC
make a bridge connection with.
Address
You can connect to up to 4 peer devices.
Security
Select whether to use WEP, TKIP or AES encryption for your WDS
connection in this field.
EncrypType
Otherwise, select No Security.
The Encryp key is used to encrypt data. Peers must use the same key
EncrypKey
for data transmission.
Apply Click Apply to save your changes to MWR222.
Refresh Click Refresh to reload the previous configuration for this screen.
MWR222 User's Guide
100