Accessing The Web Configurator In Wisp Mode - ZyXEL Communications MWR222 - V1.0 Manual

Figure 37 Changing to WISP
mode
Note: You have to log in to the Web Configurator again when you change modes. As
soon as you do, your MWR222 is already in WISP mode.
When you select WISP Mode, the following pop-up message window
3
appears.
Figure 38 Pop up window for WISP mode
Click OK. The Web Configurator refreshes once the change to WISP mode is
successful.

7.3.2 Accessing the Web Configurator in WISP Mode

To login to Web Configurator in WISP mode, do the following
Connect your computer to the LAN port of the MWR222.
1
The default IP address of the MWR222 is "192.168.10.1". If you did not
2
change this, you can use the same IP address in WISP mode. Open a web
browser such as Internet Explorer and type "192.168.10.1" as the web
address in your web browser.
If you changed the IP address of your MWR222 while in Router Mode, use this IP
address in WISP mode. The WISP mode IP address is always the same as the
Router mode IP address.
MWR222 User's Guide
56