Advanced Screen - ZyXEL Communications MWR222 - V1.0 Manual

The following table describes the labels in this screen.
Table 51 Network > DHCP Server > General
LABEL DESCRIPTION
Enable DHCP Enable or Disable DHCP for LAN.
Server
IP Pool Starting This field specifies the first of the contiguous addresses in the IP
Address address pool for LAN.
Pool Size This field specifies the size, or count of the IP address pool for LAN.
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to begin configuring this screen afresh.
12.4

Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses. You can also use this screen to
configure the DNS server information that the MWR222 sends to the DHCP
clients.
To change your MWR222's static DHCP settings, click Network > DHCP Server
> Advanced. The following screen displays.
MWR222 User's Guide
130