Site Survey - ZyXEL Communications MWR222 - V1.0 Manual

Table 28 Configuration > Wireless LAN > Advance Screen (WISP)
LABEL DESCRIPTION
Select CAM (Constantly Awake Mode) if you do not want your
MWR222 to go to "sleep" when no wireless activity is detected in the
Wireless LAN.
Power
Select Power Saving Mode if you want the MWR222 to go to sleep when
Saving Mode
no wireless connection is needed for a period of time. This means the
MWR222 consumes less electrical power.
This is the maximum data fragment size that can be sent in a wireless
RTS
network before the AP fragments the packet into smaller data frames.
Threshold
This value controls how often wireless clients must get permission to send
information to the AP. The lower the value, the more often the wireless
Fragment
clients must get permission. If this value is greater than the
Threshold fragmentation threshold value, then wireless clients never have to get
permission to send information to the AP.
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to reload the previous configuration for this screen.

7.5.5 Site Survey

Use this screen to view nearby wireless networks and select one to connect to in
WISP mode. Go to Configuration > Wireless LAN to open the following screen.
MWR222 User's Guide
67