Leds - ZyXEL Communications MWR222 - V1.0 Manual

configuration file, you would not have to totally re-configure the MWR222. You
could simply restore your last configuration.

1.5 LEDs

Figure 2 Front Panel
The following table describes the LEDs and the WPS button.
Table 1 Front Panel LEDs and WPS Button
LED COLOR
POWER Green
Battery Green
Amber
Red
WLAN Green
MWR222 User's Guide
STATUS DESCRIPTION
On The MWR222 is receiving power and functioning
properly.
Slow The MWR222 is booting.
Blinking
Fast The reset button has been pressed longer than 5
Blinking seconds and the MWR222 is being reset to factory
default configuration.
Off The MWR222 is not receiving power.
On The MWR222 is charged.
On The MWR222 is charging.
On The MWR222 is low on battery power.
The MWR222 is VERY LOW on battery power. If AC
Blinking
power is not supplied within 10 minutes, the MWR222
will automatically shut down.
On The MWR222 is ready, but is not sending/receiving
data through the wireless LAN.
20