ZyXEL Communications MWR222 - V1.0 Manual page 39

- Quota
management
- Quota Usage
- Percentage Usage
Interface Status
Interface
Status
Rate
Summary
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status
MWR222 User's Guide
This shows the on/off status of data usage management
When Quota management is enabled and MWAN is the primary WAN, it
shows the number of MBs are used.
When Quota management is enabled, ... and MWAN is the primary WAN,
it shows the percentage of the maximum quota has been reached.
This displays the MWR222 port types. The port types are: WAN, LAN
,WLAN and Mobile WAN
For the LAN and WAN ports, this field displays Down (line is down) or
Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
For the Mobile WAN, it displays Down when the mobile WAN is not
connected, Up when the mobile WAN is connected, and Ready when the
mobile WAN is connected in the standby mode.
For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP
encapsulation. This field displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and N/A when the WLAN is disabled.
Click Details... to go to the Monitor >
Use this screen to view the amount of network bandwidth that
applications running in the network are using.
Click Details... to go to the Monitor >
this screen to view current DHCP client information.
Click Details... to go to the Monitor >
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor >
screen. Use this screen to view the wireless stations that are currently
39
BW MGMT Monitor screen.
DHCP Table screen. Use
Packet Statistics screen.
WLAN Station Status