Set Text Orientn; Sfcc Char (Spc Coax, Spc Twinax); Sfcc D Command; Skip Cmd Prefix - Printronix T5000 User Manual

Set Text Orientn

(From page 129, page 131, page 138.) Specifies the direction in which
characters are printed on the page. This allows the printer to print languages
which are printed right to left instead of left to right.
•
Control By Host. Allows printers configured as a 4234 to use the "Set
Text Orientation" command from the host.
•
Left to Right.
•
Right to Left. When a right to left language is selected, the host will be
notified of print direction changes when the printer is put online.
The factory default is Control By Host.
SFCC
(From page 142.) This option selects the Special Function Control Code. The
default value is the caret ^ (decimal 94). Valid values are 17 through 255. Run
a configuration printout to determine the currently selected SFCC.
The range is 17-255, and the factory default is 94.

SFCC Char (SPC Coax, SPC Twinax)

(From page 134, page 135.) Determines what character is printed when an
EBCDIC Logical Not character ¬ (Hex 5F) is received from the host.
•
Set 1 <%>*
•
Set 2 ^^$
•
Set 3 _%_
•
User Defined
The factory default is Set 1 <%>.

SFCC d command

(From page 146.) This menu option is for backward compatibility.
•
Even dot plot. This option interprets the SFCC d command as even dot
plot.
•
Double high. This option interprets the SFCC d command as double
high. Select this option for backward compatibility.
The factory default is Even dot plot.

Skip Cmd Prefix

(From page 140.) Stands for Skip Command Prefix. This parameter
determines if the printer will print any data before a PGL command is
received.
•
Enable. The printer ignores all data before a PGL command.
•
Disable. The printer will print all data before a PGL command.
The factory default is Enable.
191