Select Font; Auto Uppercase; Skip Cmd Prefix; Forms Handling - Printronix P8000 Series Administrator's Manual

Select Font

Select Font specifies which language is currently selected for use with the
PGL. Refer to "IGP/PGL Font Set Menu" on page 184. for available
selections.
Slash 0
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR A and OCR B.
•
Disable (factory default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line. The
options are:
•
6.0 (factory default)
•
8.0
•
9.0
•
10.0

Auto Uppercase

This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Disable (factory default). The printer will print text in upper and
lowercase.
•
Enable. The printer will print text in uppercase only.

Skip Cmd Prefix

This parameter determines if the printer will print any data before a PGL
command is received.
•
Enable (factory default). The printer ignores all data on the current line
before an IGP command.
•
Disable. The printer will print all data on the current line before an IGP
command.

Forms Handling

This submenu allows the user to handle the form in the following ways:
•
Disable (factory default). No effect.
•
Auto Eject. Automatically ejects a page at the end of the job to spill out
the last page.
•
Auto TOF. Automatically does a form feed (FF) at the end of each form to
the next top of form.
IGP/PGL Submenu
177