Select Font; Auto Uppercase; Skip Cmd Prefix - Printronix N7000 H-Series User Manual

Chapter 4
IGP/PGL Emulation
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
•
Disable (default). The printer ignores all carriage returns that are not
followed by line feeds.
•
Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.

Select Font

Select Font specifies which language is currently selected for use with the
PGL. Refer to "IGP/PGL Font Set Menu" on page 132 for available selections.
Slash 0
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR A and OCR B.
•
Disable (default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line. The
options are:
•
6.0 (default)
•
8.0
•
9.0
•
10.0

Auto Uppercase

This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Disable (default). The printer will print text in upper and lowercase.
•
Enable. The printer will print text in uppercase only.

Skip Cmd Prefix

This parameter determines if the printer will print any data before a PGL
command is received.
•
Enable (default). The printer ignores all data on the current line before an
IGP command.
•
Disable. The printer will print all data on the current line before an IGP
command.
124