Host Interface; Ethernet Address - Printronix P7000 Quick Setup Manual

QUICK SETUP
(continued)
Load Save
Config. Config.
Factory* 1*
1-8 2-8

Host Interface

The Host Interface menu enables you to select and configure
interfaces between the printer and your host computer.
Device ID
This parameter defines the printer emulation as IPDS, 4234-2 or
5225. After the emulation has been changed, a POR status is sent
to the host. IPDS is the default.

Ethernet Address

•
IP Address. A numeric address such as 123.45.61.23 which
identifies a printer or server in a LAN or WAN.
•
Subnet Mask. A binary value used to divide IP networks into
smaller subnetworks or subnets. This mask is used to help
determine whether IP packets need to be forwarded to other
subnets.
•
Gateway Address. A gateway address is the IP address of a
hardware device (gateway) that translates data between two
incompatible networks, which can include protocol translation.
•
MAC Address. This menu item is the Manufacturer's Assigned
Number, and is unique for each printer. It is read-only.
P7000 H-Series Quick Setup Menu
* = Factory Default
1
Available for Hanzi and Kanji LP+ Printers Only
2
Available for Hangul LP+ Printers Only
3
If installed
4
Available for Zero Tear Pedestal Printers Only
Power-Up
Config.
Factory*
1-8
63