Host Interface Menu - Printronix P8000 Series Administrator's Manual

HOST INTERFACE Menu

HOST
INTERFACE
(from page 73,
74, 75, 76, 77,
78, and 79)
Active
Host
Auto Switching (see page 94)
1
Centronics
Serial
1
IEEE 1284
3
Ethernet
USB
2
Parallel
USB
(see page 100)
The Host Interface Menu enables you to select and configure one of many
types of interfaces between the printer and your host computer. The currently
selected interface is indicated with an asterisk on the control panel message
display. Each interface has its own submenu with a set of interface
parameters which can be configured.
IMPORTANT
When set to Auto Switching, the printer will load the power-up
configuration and the new interface parameters. Any settings made and
not saved before selecting these interfaces will be lost.
OpenPrint P8000 HD Postscript/PDF Firmware
* = Factory Default
1
If installed.
2
Used by LG firmware instead of Centronics and IEEE 1284.
3
Default for Indian Language firmware.
Auto Parallel
2
Switching Type
Centronics*
IEEE 1284
HOST INTERFACE Menu
1
Centronics Serial
(see page 98) (see page 100)
1
IEEE 1284
(see page 96)
93