Host Interface - Printronix P7010 User Manual

Chapter 4

HOST INTERFACE

HOST INTERFACE
HOST
INTERFACE
(from page 59)
Auto
Switching*
(see page 73) (Available with
CT Option)
Serial
(see page 81) (see page 86)
The Host Interface Menu enables you to select and configure one of many
types of interfaces between the printer and your host computer. The currently
selected interface is indicated with an asterisk on the control panel message
display. Each interface has its own submenu with a set of interface
parameters which can be configured.
IMPORTANT
When switching between Twinax, Coax, or Auto Switching, the printer
will load the power-up configuration and the new interface parameters.
Any settings made and not saved before selecting these interfaces will
be lost.
72
Twinax Coax
(Available with (see page 75)
CT Option)
E-Net Ethernet
1
Adapter
(see page 86)
* = Factory Default
1
If installed
IEEE 1284 Centronics
(see page 76)
Dataproducts
(see page 79)