Printer
Protocol
(from page 147)
Proprinter
XL
Define CR
Code
CR = CR*
Enable*
CR = CR + LF
Disable
20 CPI
Condensed
Enable*
Disable
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Proprinter XL Emulation
Auto LF
Define LF
Code
LF = LF*
Enable*
LF = CR + LF
Disable
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends
Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each
Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage
Return.
Proprinter XL Emulation
* = Factory Default
FF Valid at
Character
TOF
Set
(see page 170) Set 1*
Set 2
Alt. Char
Set
167