Proprinter Xl Emulation - Printronix P8000 Series Administrator's Manual

Chapter 4
EMULATION Menu

Proprinter XL Emulation

Printer
Protocol
(from page 125)
Proprinter
XL
Define CR Autowrap
Code
CR = CR* With LF+CR*
CR = CR + LF With CR
Disable
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
•
CR = CR (factory default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return.
Autowrap LF
This option defines the printer action when print data is received past the
forms width setting.
•
With LF+CR (factory default). Performs an automatic carriage return and
line feed when data is received past the forms width.
•
With CR. Performs an automatic carriage return (without line feed) when
data is received past the forms width.
•
Disable. Discards any data past the forms width.
Define LF Code
•
LF = LF (factory default). Does not perform an automatic carriage return
when a Line Feed command is received. The next print position will be
the current print position of the next line.
•
LF = CR + LF. Forces an automatic carriage return with each Line Feed
command received. The next print position is print position 1 of the next
line.
160
Define LF FF valid at
Code TOF
LF = LF* Enable*
LF = CR + LF Disable
* = Factory Default
Character
Alt. Char
Set
Set
(see page 162) Set 1*
Set 2
20 CPI
Condensed
Enable*
Disable