Proprinter Xl Emulation - Printronix P7010 User Manual

Proprinter XL Emulation

Printer
Protocol
(from page 138)
Proprinter
XL
Define CR
Auto LF
Code
CR = CR*
Enable*
CR = CR + LF Disable
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each carriage
return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return.
Auto LF
This option defines the printer action when print data is received past the
forms width setting.
•
Enable (default). Performs an automatic carriage return and line feed
when data is received past the forms width.
•
Disable. Discards any data past the forms width.
Define LF Code
•
LF = LF (default). Does not perform an automatic carriage return when a
Line Feed command is received. The next print position will be the current
print position of the next line.
•
LF = CR + LF. Forces an automatic carriage return with each Line Feed
command received. The next print position is print position 1 of the next
line.
FF Valid at TOF
•
Enable (default). Performs a form feed when the host sends a Form Feed
command and the printer is at the top of form.
•
Disable. Will not perform a form feed when the host sends a Form Feed
command and the printer is at the top of form.
FF valid at
Define LF
Code TOF
LF = LF* Enable*
LF = CR + LF Disable
Proprinter XL Emulation
* = Factory Default
Character Alt. Char
Set
Set
(see page 161) Set 1*
Set 2
20 CPI
Condensed
Enable*
Disable
159