Figure 27. Specifying The Bar Code Block Size Using The Bar Code Output Control - Printronix S828 Programmer's Manual

Programmer Manual
Decimal Hex
12-13 C-D
14-15 E-F
16-x 10-x
Figure 27 shows the BCOC field specifying the size of the bar code block on the logical page.

Figure 27. Specifying the Bar Code Block Size Using the Bar Code Output Control

Bar Code Data Descriptor (BCDD)
BCAP BCOC BCDD
Length ID Data
The Bar Code Data Descriptor structured field is the last structured field in the DATA portion of the Write
Bar Code Control command. This field specifies the parameters that define the bar code symbols that
print. The format of the BCDD field is:
Decimal Hex
0-1 0-1
2-3 2-3
4 4
5 5
6-7 6-7
8-9 8-9
Chapter 5 IPDS Programming Information
Content
8000 - 7FFF
8000 - 7FFF
Content
001B – XXXX
A6EB
00
01
05A0 - 7FFF
1626 - 7FFF
05A0 - 7FFF
1626 - 7FFF
Description
X Offset of Medium Presentation Space Origin in Units
Y Offset of Medium Presentation Space Origin in Units
Reserved
Description
Length of This Structured Field
Structured Field ID
Unit Base (10 in.)
Unit Base (10 cm)
Reserved
Units per Unit Base (10 in.)
Units per Unit Base (10 cm)
Units per Unit Base (10 in.)
Units per Unit Base (10 cm)
200
PTX‐S828
260071‐001A