Select Sfcc; 80-9F Hex; Control Code 06 - Printronix P9212 Setup Manual

Select SFCC

The Select SFCC feature allows you to select which ASCII codes will
function as the command delimiter (Special Function Control Character).
•
SOH (01 hex)
•
ETX (03 hex)
•
ESC (1B hex)
•
CIRCUMFLEX (5E hex) — also called caret or "hat" (^)
•
TILDE (7E hex) — (~)
•
TILDE, RIGHT BRACKET (7Eh 5D hex) — (~])
NOTE: SOH, ETX and ESC are non-printable (control) characters. The
NOTE: The Select SFCC parameter is available only when the P-Series
80–9F Hex
The 80–9F Hex feature determines whether the printer processes ASCII
codes 80h through 9F hex as control codes or as printable characters. (Refer
to the Programmer's Reference Manual.)

Control Code 06

The Control Code 06 feature defines the function of ASCII code 06 hex
(ACK). You can select alternate line spacing of either 8 LPI or 10.3 LPI.
NOTE: The Control Code 06 parameter is available only when the P-Series
3–38
characters (^), (~),and (~]) are printable characters; however, if you
choose any of these as the command delimiter, do not use them as
printable characters in the host data stream, or print errors will
occur.
Printer Protocol has been selected.
Printer Protocol or P-Series XQ Printer Protocol has been selected.
Configuring the Printer