Auto Low Power Time; Copy Output Destination - Kyocera 1650 Advanced Operation Manual

6 Press the Reset key. The message display returns to the copier basic screen.

Auto Low Power Time

Set the time that elapses before the low power mode is automatically activated.
Time that can be set:
Inch Specification — 1 to 240 minutes (in 1 minute increments)
Metric Specification — 1 to 120 minutes (in 1 minute increments)
1
Display the Machine default screen. (See
page 3-12.)
2 Press the key or the
time.
3 Press the Enter key.
4
Press the < key or the > key to select the desired time
from 1 to 240 minutes [1 to 120 minutes].
5 Press the Enter key.
6 Press the Reset key. The message display returns to the copier basic screen.

Copy Output Destination

Set the paper output destination with priority for copying.
Setting item
Top tray
Finisher Tray Output Optional finisher
Job separator
Note
This item is displayed only if the optional finisher or job separator is installed.
1
Display the Machine default screen. (See
page 3-12.)
2 Press the key or the
Destn.
3 Press the Enter key.
4
Press the key or the
output destination.
How to Display the Machine Default Screen
key to select Low power
Output destination
Output tray of main body
Optional job separator
How to Display the Machine Default Screen
key to select Copy Otput
key to select the desired
Machine default:
Orig. direction
Sleep mode time
Low power time
Low power mode time:
15Min. 1-240Min.
Machine default:
Sleep mode time
Low power time
Copy Otput Destn Top tray
Copy Output Destination:
Top tray
*
Finisher Tray Output
System Menu
on
: Rear
: 30Min.
: 15Min.
on
: 30Min.
: 15Min.
:
3-19