Show Http Server Status; Show Ip Information - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command History

show http server status

Command
Command Modes
Example
Command History

show ip information

Command
Command Modes
Example
Command History
12-9
Version History
1.00.001 This command was introduced.
To display the HTTP server status.
show http server status
Privileged EXEC mode
switch# show http server status
HTTP server status
HTTP port is
Version History
1.00.001 This command was introduced.
To display the IP information.
show ip information
Privileged EXEC mode
switch# show http server status
HTTP server status
HTTP port is
switch# show ip information
Global IP Configuration:
------------------------
IP routing is enabled
Default TTL is 64
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP echo replies are always sent
ICMP mask replies are always sent
Number of aggregate routes is 10
Number of multi-paths is 2
Load sharing is disabled
Path MTU discovery is disabled
Version History
1.00.001 This command was introduced.
: Enabled
: 80
: Enabled
: 80