Default Ip Address Allocation Protocol - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

default ip address allocation protocol

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
12-4
default ip address <ip-address> [ subnet-mask <subnet mask> ]
[ interface <interface-type> <interface-id> ]
ip-address
IP address of the default interface
subnet-mask
Subnet mask of the default interface
subnet mask
interface
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
interface-type
Ethernet).
interface-id
Interface-id is slot/port number.
IP address - 192.168.10.200
Subnet mask - 255.255.255.0
Global Configuration Mode
This command is to configure the IP address and subnet mask of default
interface.
switch(config)# default ip address 10.0.0.250 subnet-mask
255.0.0.0
Version History
1.00.001 This command was introduced.
To configure the protocol that the IP address of default interface is assigned.
default ip address allocation protocol {bootp | rarp | dhcp}
bootp
Bootp protocol
rarp
RARP protocol
dhcp
DHCP protocol
DHCP
Global Configuration Mode
This command is to configure the protocol that the IP address of default interface
is assigned.
switch(config)# default ip address allocation protocol bootp
Version History
1.00.001 This command was introduced.