Garp Timers Configuration; Mstp; Mstp Global Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Click Apply to submit the changes.

GARP Timers Configuration

This page is to set the GARP timers on an interface.
Parameter
Port No
GarpJoinTime (10
2^30-14)(msecs)
GarpLeaveTime (30 ~
2^31-18)(msecs)
GarpLeaveAllTime (40
~ 2^31-8)(msecs)
Click Apply to submit the changes.

MSTP

MSTP Global Configuration

This page is to configure the MSTP global settings of the Switch.
6-8
Figure 37 – Layer2 Management > Dynamic VLAN > Port Settings
Description
Specify the switch port to be configured.
~ Specify the join time of GARP. Default is 20 milliseconds.
Specify the leave time of GARP. Default is 60 milliseconds.
Specify the leave all time of GARP. Default is 100 milliseconds.