Revision; Spanning-Tree Mst Hello-Time - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Default Settings
Command Modes
User Guidelines
Example
Command History

revision

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

spanning-tree mst hello-time

Command
Syntax Description
Default Settings
29-4
00: 00: 00: 00: 00: 00
MSTP Configuration Mode
Using no form the reset the name to default.
switch(config-mst)# name trendnet
Version History
1.00.001 This command was introduced
To set the revision number for the MST reigon.
revision <value(0-65535)>
no revision
value(0-65535)
Specify the number of revision.
0
MSTP Configuration Mode
Using no form to reset the revision number to default.
switch(config-mst)# revision 1
Version History
1.00.001 This command was introduced
To set the MST hello time to a port.
spanning-tree mst hello-time <value(1-2)>
no spanning-tree mst hello-time
value(1-2)
2 seconds
Specify the hello time value of the port.