Static Multicast Address Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Parameter
Select
VLAN ID
MAC Address
Allowed Port
Status
Click Apply to submit the changes the static MAC, Delete to delete it from the FDB.

Static Multicast Address Configuration

This page is to create/configure a static multicast MAC address in the L2 forwarding database.
Parameter
VLAN ID
MAC Address
Allowed Ports
Status
Click Add to create a new static MAC, Reset to clear the value.
Parameter
Select
VLAN ID
MAC Address
Allowed Ports
Status
Click Apply to submit the changes the static MAC, Delete to delete it from the FDB.
6-25
Description
Select which MAC address to apply the configuration changes.
VLAN ID of this MAC address belongs to.
The MAC address.
Specify the port allowed to forward the MAC address.
Specify the attribute of this static MAC. The options are:
Permanent - The static multicast will keep alive.
DeleteOnReset - The static multicast will be deleted after switch reset.
DeleteOnTimeout - The static multicast will be deleted when aging time out.
Default is Permanent.
Figure 65 – Layer2 Management > Static MAC Entries > Multicast Entries
Description
Specify the VLAN ID of the new MAC address entry.
Specify the MAC address if this new entry.
Specify the port allowed to forward the MAC address.
Specify the attribute of this static MAC. The options are:
Permanent - The static multicast will keep alive.
DeleteOnReset - The static multicast will be deleted after switch reset.
DeleteOnTimeout - The static multicast will be deleted when aging time out.
Default is Permanent.
Description
Select which MAC address to apply the configuration changes.
VLAN ID of this MAC address belongs to.
The MAC address.
Specify the port allowed to forward the MAC address.
Specify the attribute of this static MAC. The options are:
Permanent - The static multicast will keep alive.
DeleteOnReset - The static multicast will be deleted after switch reset.
DeleteOnTimeout - The static multicast will be deleted when aging time out.
Default is Permanent.