Dot1X Max-Start; Dot1X Port-Control - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
User Guidelines
Example
Command History

dot1x max-start

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

dot1x port-control

Command
Syntax Description
31-6
Using no form to reset the number of retry to default.
switch(config-if)# dot1x max-req 10
Version History
1.00.001 This command was introduced
To set the maximum EAPOL retries of the authenticator.
dot1x max-start <count(1-65535)>
no dot1x max-start
count(1-65535)
Specify the number of retry.
3 retries
Interface Configuration Mode
Using no form to reset the number of retry to default.
switch(config-if)# dot1x max-start 10
Version History
1.00.001 This command was introduced
To set the authenticator control on ports.
dot1x port-control
force-unauthorized}
no dot1x port-control
auto
force-authorized
force-unauthorized
{auto |
Enable the 802.1X authentication on this port, and
the port authorized or unauthorized will based on the
802.1X authentication result.
All traffic is transparent to the port.
All traffic is blocked to the port.
force-authorized |