Show Nvram - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Command Modes
Example
Command History

show nvram

Command
Command Modes
Example
12-8
show system information
Privileged EXEC mode
switch# show system information
Hardware Version
Firmware Version
Switch Name
System Contact
System Location
Logging Option
Login Authentication Mode
Config Save Status
Remote Save Status
Config Restore Status
Web Timeout Interval
Cli Timeout Interval
Version History
1.00.001 This command was introduced.
To display the current information stored in NVRAM.
show nvram
Privileged EXEC mode
switch# show nvram
Default IP Address
Default Subnet Mask
Default IP Address Config Mode
Default IP Address Allocation Protocol : DHCP
Switch Base MAC Address
Default Interface Name
Default RM Interface Name
Config Restore Option
Config Save Option
Config Save IP Address
Config Save Filename
Config Restore Filename
PIM Mode
IGS Forwarding Mode
Cli Serial Console
SNMP EngineID
SNMP Engine Boots
Default VLAN Identifier
: Rev.A1
: 1.00.002
: SysName
: SysContact
: SysLocation
: Console Logging
: Local
: Not Initiated
: Not Initiated
: Successful
: 600
: 18000
: 192.168.10.200
: 255.255.255.0
: Manual
: 00:74:24:00:02:00
: Fa0/1
: NONE
: Restore
: Startup save
: 0.0.0.0
: iss.conf
: iss.conf
: Sparse Mode
: MAC based
: Yes
: 80.00.08.1c.04.46.53
: 2
: 1