Sntp Poll-Interval; Sntp Primary-Ip - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Syntax Description
Command Modes
Example
Command History

sntp poll-interval

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

sntp primary-ip

21-3
from
january ~ december
day (1-31)
hour (0-23)
minute (0-59)
to
january ~ december
day (1-31)
hour (0-23)
minute (0-59)
Global Configuration Mode
switch(config)# sntp dst from april 1 0 0 to September 1 0 0
Version History
1.00.001 This command was introduced
To set the time interval that SNTP synchronizes the time on SNTP server.
sntp poll-interval <seconds (30-86400)>
seconds (30-86400)
30 seconds
Global Configuration Mode
switch(config)# sntp poll-interval 3600
Version History
1.00.001 This command was introduced
To set the primary SNTP server IP address.
Time that DST startis from
Specify the month that DST starts.
Specify the day that DST starts.
Specify the hour that DST starts.
Specify the minute that DST starts.
Time that DST ends from
Specify the month that DST ends.
Specify the day that DST ends.
Specify the hour that DST endts.
Specify the minute that DST ends.
Specify the time interval that SNTP synchronizes the
time on SNTP server.