Chapter 27 Dynamic Vlan Command; Dynamic Vlan Command List; Set Gvrp; Set Port Gvrp - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

Dynamic VLAN Command List

set gvrp

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

set port gvrp

Command
27-1
Dynamic VLAN Command

set gvrp

set port gvrp

set garp timer

vlan restricted

shutdown garp

debug garp

show garp timer
To global enable/disable GVRP function.
set gvrp { enable | disable }
enable
Enables GVRP globally.
disable
Disable GVRP globally.
Enable
Global Configuration Mode
switch(config)# set gvrp disable
Version History
1.00.001 This command was introduced
To enable/disable gvrp on specific ports.
set port gvrp <interface-type> <interface-id> { enable |
disable }
Chapter 27