Configuring Acl Functions; Acl Function List; Mac Acl Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

ACL Function List



MAC ACL Configuration


IP Standard ACL Configuration

IP Extended ACL Configuration

Classmap Settings

Policymap Settings
MAC ACL Configuration
This page is to create/configure a rule to MAC Access Control List.
Parameter
ACL Number
Source MAC
Destination MAC
Action
VLAN ID
Port List (Incoming)
Protocol
7-1

Configuring ACL Functions

Figure 67 – ACL > MAC ACL
Description
Specify the ACL ID of this rule. The possible ID of MAC ACL is 1-65535.
Matching packets with a specific source MAC address.
Matching packets with a specific destination MAC address.
Specify the action for packet matched. Select Permit to process the packets,
Deny to discard them.
Matching packets with a specific VLAN ID.
Specify the ports to apply this ACL rule.
Matching packet with specific protocol (Ether type). The options are:
Protocol Ether Type
aarp 0x80F3(33011).
amber 0x6008(24584).
dec-spanning 0x8138(33080).
decnet-iv 0x6003(24579).
diagnostic 0x6005(24581).
dsm 0x8309(32825).
etype-6000 0x6000(24576).
etype-8042 0x8042(32834).
lat 0x6004(24580).
Chapter 7