Igmp Snooping Interface Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Parameter
Router Port Purge
Interval (60~600 Secs)
Group-Member Port
Purge Interval
(130~2335 Secs)
Report Forward
Interval (1~25 Secs)
Group Query Interval
(1~5 Secs)
Querier Query Interval
(60~600 Secs)
Click Apply to submit the changes, Reset to clear the values.

IGMP Snooping Interface Configuration

This page is used to configure the VLAN basis IGMP snooping settings.
Parameter
VLAN ID
IGMP Snooping Status
Fast Leave
Querier Status
Router Port List
Click Add to add a new VLAN to the list, Reset to clear the value.
Parameter
Select
VLAN ID
IGMP Snooping Status
Current Version
Fast Leave
Querier Status
Router Port List
Click Apply to submit the changes the IGMP snooping setting of an existing VLAN, Delete to delete one
VLAN from the list.
6-23
Figure 60 – Layer2 Management > IGMP Snooping > Timer Configuration
Description
To set the time-out period that an IGMP multicast router port hasn‟t received
IGMP router control packet, it will be deleted. Default is 125 seconds.
To set the purge interval that an IGMP member port hasn‟t‟ received IGMP
report packet, it will be deleted. Default is 260 seconds.
To set the time interval that IGMPv2 report of the same group will not be
forwarded to the router ports. Default is 5 seconds.
To set up the time interval to send the group specific query. Default is 2
seconds.
To set up the time interval to send the IGMP general query. Default is 125
seconds.
Figure 61 – Layer2 Management > IGMP Snooping > Interface Configuration
Description
Specify which VLAN to add to the IGMP snooping interface list below.
Enable or disable the IGMP Snooping on this VLAN.
Enable or disable the fast leave function on this VLAN.
Enable or disable the IGMP querier function on this VLAN.
Specify the IGMP router ports of this VLAN.
Description
Select which VLAN to apply the configuration changes.
VLAN ID of this VLAN.
Enable or disable the IGMP Snooping on this VLAN.
Specify the IGMP version of this VLAN.
Enable or disable the fast leave function on this VLAN.
Enable or disable the IGMP querier function on this VLAN.
Specify the IGMP router ports of this VLAN.