Debug Ip Igmp Snooping - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
User Guidelines
Example
Command History

debug ip igmp snooping

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
32-8
Using no form the restart the snooping.
switch(config)# shutdown snooping
Version History
1.00.001 This command was introduced
To enable the debug mode of IGMP snooping.
debug ip igmp snooping {[init] [resources] [tmr] [src] [grp]
[qry] [vlan] [pkt] [fwd] [mgmt] [redundancy] | all }
no debug ip igmp snooping {[init] [resources] [tmr] [src] [grp]
[qry] [vlan] [pkt] [fwd] [mgmt] [redundancy] | all }
init
Displays the initial and shudown debug message.
resources
Displays
messages.
tmr
Displays the timer debug messages.
src
Displays the source debug messages.
grp
Displays the group debug messages.
qry
Displays the query related debug messages.
vlan
Displays the vlan debug messages.
pkt
Displays the packet dump debug messages.
fwd
Displays the L2 FDB related debug messages.
mgmt
Displays the management related debug messages.
redundancy
Displays the redundancy related debug messages.
all
Displays all debug messages.
Disable
Privileged EXEC Mode
Usin no form to disable the debug mode.
switch# debug ip igmp snooping all
the system resources management debug