Set; Police - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
User Guidelines
Example
Command History

set

Command
Syntax Description
Command Modes
Example
Command History

police

Command
Syntax Description
Command Modes
37-2
Class map must be created before associating.
switch(config-pmap)# class 1
Existing Policy-map configurations have been deleted. Please
apply the policy-map to make it active.
switch(config-pmap-c)#
Version History
1.00.001 This command was introduced
To set the new 802.1p priority or DSCP type of packets match the associated ACL
rule.
set {cos <new-cos(0-7)> | ip dscp <new-dscp(0-63)> }
no set {cos <new-cos(0-7)> | ip dscp <new-dscp(0-63)> }
cos new-cos(0-7)
ip dscp new-dscp
(0-63)
Policy-map Class Configuration Mode
switch(config-pmap-c)# set cos 1
Version History
1.00.001 This command was introduced
To set up the actions of packets match the associated ACL rule.
police <rate-Kbps> exceed-action {drop | policed-dscp-transmit
<new-dscp(0-63)>}
rate-Kbps
exceed-action drop
exceed-action
policed-dscp-transmit
new-dscp(0-63)
Policy-map Class Configuration Mode
Specify the new 802.1p priority of the packet.
Specify the new DSCP type of the packet.
Set the traffic rate threshold in Kbps for the class
map.
Drop packets if traffic rate exceeds the threshold.
Modifying the DSCP type value for packets if traffic
rate exceeds the threshold.